Doc.admin:labels

From SASDocs

Setup to print labels to doc.admin

How to set your printer to print labels directly to the printer

1. Click on Start.
2. Go to Settings then click on Printers and Faxes.
3. Right click on DOC on FABFOUR, go to Printing Preferences and click on it.
4. Click on the Xerox Settings tab, then click on Stocks, then click on Add.
5. Click on Specify stock by Identifier (upper left).
6. Click on down arrow in Identifier box and select Custom. Overwrite the stock number with 3up-labels (case sensitive), click OK.
7. Click on Specify stock by attributes.
8. Click on down arrow in Size box (just below Identifier box). Select 8.5 x 11.0 in. (U.S. Letter).
9. Go to Type, click on down arrow, select Custom and type 3up-labels, click on OK.
10. Go to Printer default, below Type, and unclick the check mark (both Drilled and Printer default boxes will be blank).
11. Go to Weight (bottom left), uncheck printer default and use up arrow to set weight to 100.
12. Click on OK, then Close, then OK, then click on down arrow above Stocks, then select 3up-labels, click on Apply.

You now have a Stock called 3up-labels.